The circulating honeycomb sandblasting room adopts the honeycomb sand suction bottom plate technology, and the sand material is conveyed and recycled by wind, without the need for the auger, bucket elevator and other machinery commonly used in traditional mechanical sandblasting rooms, which not only improves the work efficiency, but also significantly reduces the mechanical Maintenance and improved work environment. The following introduces the main features and advantages of the wind circulation honeycomb sandblasting room.

1. The equipment failure rate is low, and the maintenance work is significantly reduced.

Because the sandblasting room is equipped with a honeycomb-type sand suction floor with grid plates, and no traditional machinery such as auger, belt conveyor, bucket elevator, etc., all kinds of mechanical wear in the process of collecting sand are avoided. Equipment maintenance is mainly to replace the steel plate at the elbow of the air duct regularly according to the wear condition, the equipment failure rate is low, and the maintenance workload is small.

2. Reduce infrastructure costs

Due to the elimination of bucket elevators and other equipment, there is no need to dig deep pits, and the depth of the foundation is generally about 500mm, which saves a lot of infrastructure costs.

3. Save a lot of investment in fixed assets

The wind circulation honeycomb blasting room does not need auxiliary equipment such as sand pusher and sand suction machine, saving a lot of capital investment.

4. Completely improve the working environment

The wind circulating honeycomb sandblasting room relies on the fan to provide power. Through the sand suction floor, all the sand dust and air in the entire chamber body are sucked into the air duct, and then enter the sand dust separator. The top-to-bottom circulating airflow keeps the sand and dust at the bottom of the chamber. The dust content in the air in the wind-circulating honeycomb sandblasting room is very low, and the visibility is high, which completely improves the working environment and effectively protects the health of workers.

5. High work efficiency

During the sand blasting operation, the sand material is automatically recovered, which greatly saves the time of on-site sand cleaning and shortens the operation time of a single segment.

The wind circulation honeycomb sandblasting room is obviously superior to the traditional sandblasting room in terms of input cost, degree of automation, equipment maintenance, environmental protection degree, and labor intensity.

Below, the editor of Juchen sandblasting equipment will share with you more knowledge about sandblasting.

The meaning of sandblasting is to describe the mechanical equipment that pushes the surface of the material to be cleaned and rusted or etched in very fine points.

Sandblasting equipment consists of three fundamentally different parts: the abrasive itself, the air compressor, and the nozzle. For etching and cleaning small objects, sometimes a piece of glass is also needed, because some dust-like matte glass is very widely used in the market. Sichuan Honeycomb Sandblasting Room

The blasting effect is mainly determined by the part material and blasting abrasive. Depending on the part material, blasting abrasives can range from strong metal abrasives to soft resin abrasives, with dry blasting and liquid blasting also being important considerations.

The scope of application is as follows:

This machine can complete the cleaning of molds, forging castings, welding parts, heat treatment parts, stamping parts and machined parts; rough surface, descaling, residual salt and burr, pretreatment process before spraying and electroplating. In addition to carbide, Lighting treatment; this machine is also used for blasting glass shot, plastic sand, and strengthening the surface of light-decorated parts; this machine is suitable for single-piece mass production of medium and small parts.

The performance characteristics are as follows:

Novel design, simple and convenient operation; good processing efficiency, low energy consumption; automatic sand return, cyclone separator can separate dust and sand, reduce abrasive consumption; main components are imported high-quality parts, long service life;

As a cleaning method, sandblasting is often used to remove paint or sealant application surfaces. When painting, an unwanted trap dust, dirt, or a new layer under a layer of foam on paint, or other imperfections. The high-velocity abrasive particles blasted by the sandblasting machine cause all defects to be cleaned loose, which can then be easily washed off, creating an incredibly smooth surface to lay a fresh coat of paint on. Sandblasting can also be used for items such as cleaning, such as the shells of ships or large structures on the Golden Gate Bridge.