When the air/gas contains combustible or explosive dust particles, such dust particles can be controlled by using spray tower exhaust gas treatment equipment. Generally used as a scrubbing medium for spray tower exhaust gas treatment equipment. The spray tower equipment consists of multiple nozzles that atomize the scrubbing medium into fine droplets.

​1. Mixing water and sand in the sandblaster will soothe most of the dust! Then reach the environmental protection requirements. When sandblasting, water and sand contact the surface of the steel structure together, and no sparks will occur when the sand impacts the surface of the steel structure. The function is the same as dry sandblasting, it can reach sa2.5-3 level

Processing features of water blasting machine：1. It is made of glass cylinder or stainless steel during operation, which will not rust. Like rubber sheets are suspended in the working cabin to prevent jet impact. 2. No flying dust is generated during operation, which greatly improves the environmental pollution caused by dust and endangers the health of operators.

As a mechanic, you must be familiar with burrs. In the machining process, it is ubiquitous, no matter how advanced and sophisticated equipment you use, it will be born with the product. Some burrs on mechanical parts are caused by plastic deformation during the cutting process; some are burrs from casting, die forging, etc.,

In the air, oxygen accounts for 21%, and rusting is a change after oxidation caused by the oxygen in the metal and the air. Rusting is a chemical reaction that is essentially the oxidation of metals. Therefore, it is very common for all kinds of metals to rust. As large as aircraft carriers, aircraft, ships, and as small as embroidery needles

Why Sandblasting：Sand blasting is to use compressed air as the power to form a high-speed jet beam to spray the blasting material (copper ore sand, quartz sand, emery, iron sand, sea sand) to the surface of the workpiece to be treated at a high speed , to change the appearance or shape of the workpiece surface.