After people have used it for a period of time, automatic sandblasting machines must be regularly maintained and cleaned. Although automatic sandblasting machines are relatively simple to clean, people pay attention to Still have to pay a lot of attention. The sandblasting machine means that the actual effect of the ultra-low temperature refrigeration of liquid nitrogen makes the alloy products of rubber and plastic products brittle. At this time, the burrs are embrittled because of the commodities, and within the time difference when the burrs are embrittled but the handicrafts are not Spray a polymer material object to collide with the burrs of handicrafts to remove the burrs of aluminum alloy products and aluminum and zinc alloy materials of rubber and plastic products with high quality.

Sand blasting machine is a kind of equipment that uses air compression as the driving force to generate a high-speed jet beam to spray the spray material to the surface of the steel to be solved, so as to change the physical properties of the outer surface of the steel surface. . The sandblasting machine maintains automatic sandblasting according to the electrical system, and can automatically adjust the sandblasting angle, sandblasting time, sandblasting spacing, back blowing time, the fitness movement of the spray gun, the speed ratio of the operating table, etc. .

1. If the application time is too long, you need to pay attention to the trilogy, first turn off the power, then clean the main case, then clean the case, and then store it;

2. The usual cleaning is very simple, that is to say, it is good to scrub after application and then apply some oil;

3. Never use water to wash and scrub;

The above 3 points are the things that people must pay attention to when cleaning the automatic sandblasting machine. When cleaning the automatic sandblasting machine, they must pay attention to avoid damage to the characteristics of the equipment caused by poor cleaning.