What is an automatic sandblasting machine used for?

1. Pretreatment: Electroplating, painting, spraying, etc. are all covered by sandblasting before processing, the surface is absolutely clean, and the adhesion and anti-corrosion ability of the covering layer are greatly improved.

Second, cleaning: removal of oxide scale, residue and dirt from metal workpieces such as castings, stamping parts, welded parts, and heat-treated parts; surface cleaning of non-metallic products, removal of black spots on the surface of ceramic blanks and restoration of paint patterns, etc.

3. Refurbishment of old parts: refurbishment and cleaning of all moving parts such as automobiles, motorcycles, and electromechanical equipment. At the same time, the fatigue stress is eliminated and the service life is prolonged.

Fourth, light decoration: all metal products and non-metal products (plastic, crystal, glass, etc.) surface traces are eliminated, matt matte surface treatment, so that the product surface can be upgraded.

Five, mold treatment: mold surface argon light fog surface treatment, graphic production, and mold cleaning, do not hurt the mold surface, ensure mold accuracy.

Six, burr treatment: removal of micro burrs of machined parts, elimination of plastic overflow burrs of injection molded parts.

7. Rework of defective products: removal of defective covering layers of products, removal of poor surface coloring and printing.

8. Strengthening: Increase the surface hardness of metal parts and eliminate stress, such as surface treatment of aircraft blades, springs, machining tools and weapons.

Nine, etching and anti-skid processing: metal products, non-metal products surface etching patterns, text and anti-skid treatment, such as: marble, handle anti-skid, seals, stone inscriptions, etc.

10. Treatment of denim: The effect of matte, whitish and whiskering of denim is achieved.

Advantages of automatic sandblasting machine:

1. High production efficiency.

2. It can be produced in large quantities.

3. The roughness of the treated workpiece surface can be basically the same.

4. Cost saving.

It has a wide range of uses. It depends on what kind of product you are~ Sandblasting itself is a non-standard industry~