Our new anti-corrosion (oxide layer) cleaning complete set of sandblasting equipment, mobile small high-pressure rust blasting machine (MG-YH300P) with air pressure It is made of machine, and its rust removal, paint removal, and oxidation layer removal anti-corrosion renovation effect is very good.

This machine adopts the pressure feeding type sand blasting (shot blasting) mechanism, that is, the high-speed flow of compressed air in the high-pressure tank is used to form a high-pressure effect, and the sand material in the high-pressure tank is sprayed out through the sand conveying pipe, and then along with the compressed air flow through the nozzle of the spray gun. High-speed spray to the surface of the workpiece to achieve the purpose of sandblasting.

一、MG-YH300PScope of application of sandblasting machine：

 1)glass, marble,ceramic tile,mold,Surface sandblasting cleaning and three-dimensional carving and carving of fitness and amusement equipment;

2) Shipbuilding sandblasting,Surface treatment of steel structures before painting for bridges, railways, containers, oil pipelines, chemicals, mining facilities, water conservancy projects, port construction, etc., Rust removal and anti-corrosion treatment;

2. Technical parameters of small pressure sandblasting machine;

三、Mobile small high pressure descaling sandblasting machineFeatures：

Press-in working mode, high working pressure（0.5－0.8MPa），Strong jetting force and high efficiency。

Quick start, sensitive to disconnect blasting.

Wheel structure, easy to move。

Small size, easy to add sand, suitable for single operation.

It adopts standardized pressure vessel manufacturing standards, conforms to national and industry norms, and is safe and reliable.

Equipped with wear-resistant sandblasting pipes and nozzles to ensure long-term normal operation.

Simple operation, easy maintenance and maintenance, low cost of use。 

The complete set of sandblasting machine and air compressor can be used for remote sandblasting operations. The limitations are small, and the sand pipe will not be too long to cause wear and sandblasting.

四、Instructions for use of mobile sandblasting machine

1. Wear protective helmet; sandblasting protective clothing

2.Turn off the exhaust switch and drain switch(The remaining slight gaps let out water vapor)，Add the sifted abrasive to the jar（0not higher than the tank4/5，Otherwise, it will affect the life of exhaust valve and air shut-off valve)；

3.Open the intake valve, hold one end of the nozzle joint of the sandblasting pipe with both hands, do not point the gun at anyone；

4.Press the remote control switch to adjust the size of sand and gas

5.The host is in a high pressure state when it is working and cannot be moved at will;

6.The operating pressure of this equipment must not exceed0.8Mpa；

Mobile Sandblasting Machine Standard Model：

This product has been used in Heyuan Power Plant,Humen Power Plant,Shaoguan Power Plant,Zhuhai Gaolan Port,Zhuhai Terminal Natural Gas Project,CCCC Fourth Navigation Bureau,Jiufeng Steel Structure,ENN Gas,Xinyi Glass,CSG Glass,Wuchang Shipyard,CSR Group,Sany Heavy Industry, etc.