In the use of sandblasting equipment, if the sandblasting machine is used incorrectly or the details of the use of the sandblasting machine are ignored, there will be hidden safety hazards. Some things that should be paid attention to in the use of sandblasting equipment:

First of all, during the installation process of the sandblasting machine, the pipes and joints of the sandblasting equipment must be installed firmly to ensure safety. When working, you should always check for air leakage and pipeline damage. Severely worn pipelines should be replaced immediately to prevent explosions and hurt surrounding people;

Secondly, during the operation of the sandblasting machine, the spray gun of the sandblasting equipment must not face others;

The third is, in the maintenance of sandblasting equipment, pay attention to turning off the air compressor equipment, and be sure to let all the air in the trachea be released before maintenance or parts replacement can be carried out. When adding abrasive material, the compressed air in the cylinder should be exhausted before the top cover can be opened;

Fourth, when sandblasting, the operator should wear a helmet, professional sandblasting overalls and special rubber gloves for sandblasting. Especially in the use of mobile sandblasting machines and open sandblasting equipment;

Fifth, the air in the sandblasting helmet of the operator of the sandblasting machine must be filtered by a filter, and the air pressure is generally adjusted to 1.2Kg/cm2;

Sixth, the sandblasting machine should clean the sand on the scaffolding and the structure in time, and pay attention to prevent it from slipping and falling.

The above six points can basically eliminate the safety problems in the use of sandblasting equipment. If you have any good solutions or additions, you can give me your precious suggestions! Above we talked about the safety of sandblasting machines during use. Operational safety is always the top priority. Next, I will explain the safety issues of sandblasting machines during use and how to avoid these unsafe problems. . First, check the joints of the sandblasting machine. Each joint of the sandblasting equipment (trachea, yarn tube interface, etc.) must be installed firmly and the connection is reliable. In the process of operation, the wear condition of air tube and yarn tube should also be checked frequently. If serious wear condition occurs, it must be replaced immediately. Furthermore, do not face people during the operation. Also, when repairing sandblasting equipment, be sure to stop the machine, release the air, and then open the cover. Operators must wear sandblasting suits, sandblasting headgear, and sandblasting gloves during the process to prevent accidental damage to the body by high-pressure air jets of sand. Other small details should also be paid attention to, that is, after sandblasting, the sand particles scattered on the ground must be cleaned to prevent slipping and falling.