Processing features of water blasting machine

1. It is made of glass cylinder or stainless steel during operation, which will not rust. Like rubber sheets are suspended in the working cabin to prevent jet impact.

2. No flying dust is generated during operation, which greatly improves the environmental pollution caused by dust and endangers the health of operators.

3. The model is compact and compact, with pedal control, simple operation, safe and reliable.  

4. Professionally produced grinding fluid pumps, spray guns, workbenches, etc. are all equipped with wear-resistant polyurethane. Gun nozzles are made of boron carbide material for long life and reliable performance.  

5. It is suitable for abrasives of various materials and particle sizes, fine sand can be used, and it is suitable for surface treatment of precision workpieces.

6. The abrasive is recovered within a useful time, and the consumption is low.  

The primary intent of the water blaster 

1. It is used to clean the surface of the parts, as well as the pretreatment and flaw detection process of the coating. It can clean the oxide scale, residual salt, molding sand, oil debt, rust, carbon deposits, mold release agents, welded parts, castings of heat-treated parts , forgings, etc., welding slag, paint film, plating and other contaminants, the cleaning quality can reach  Sa3 level, and a useful surface can be obtained to improve the coating and electroplating.

2. It is used to remove fine burrs and surface residues on mechanical parts.  

Wet (Water Blast) Machining Features 

1. It is used for finishing high precision, low roughness Ra and complex shape parts that are difficult to complete by other processing methods.  

2. It is used to improve the physical and mechanical properties of the workpiece surface, such as changing the surface stress condition, improving fatigue resistance; improving the surface lubrication condition of the butt joint and the post-conflict motion conditions, and reducing the operating noise.  

Environmentally friendly high pressure water blasting machineFeatures

1. The model is compact and compact, with pedal control, simple operation, safe and reliable.  

2. Anti-rust agent can be added to the sandblasting fluid to prevent iron workpieces from rusting.

3. The abrasives are recovered within a useful time, and the consumption is low.  

4. It is suitable for starting materials of various materials and particle sizes. Fine sand can be used, suitable for surface treatment of precision workpieces.  

5. No flying dust will be generated during the operation, which greatly improves the pollution of dust to the environment and endangers the health of operators.  

Environmental water sandblasting machine

1. Cleaning the arch processing parts, welding to the cattle, shirts to cattle, oxide skin and welding of forgings, etc. slag, the cleaning quality reaches Sa3 level.

2. Remove microburrs and surface residues on machine parts.

3, can be crossed on the surface of the workpiece. Before crossing the layer, it acts as an active surface and advances the adhesion force of the crossing layer.  

4. It can be used to improve the physical and mechanical properties of the workpiece surface, such as changing the surface stress and improving the lubricating conditions of the butt joints.

5, it is also very suitable for the innovation of old machinery.

​​