Products Center
Tel:+86-769-82261696
Dongguan Humen Meijun Sandblasting Equipment
Full-featured wet water sandblasting machine
■Type I:Syphon negative pressure water sandblasting machine,negative pressure water sandblasting room,Stainless steel water sandblasting series
■Type II:High pressure water blasting machine,High pressure water blasting machine room, Rust removal, paint removal, oxide layer cleaning series
■Model III:High pressure water jet sandblasting,High speed cleaning water blasting for steel coil and steel plate Machine,rust removal, paint removal, oxide layer cleaning series
High pressure water blasting machine,High pressure water blasting machine room
■Type II:High pressure water blasting machine High pressure water blasting machine room Rust Removal, Paint Removal, and Oxide Layer Cleaning Series
The characteristics of this machine are: water and abrasive are mixed in the sandblasting tank, and then high-pressure air is introduced as power to form a mixture of water, gas and sand, and then passed through a A sandblasting pipe is sprayed out by a sandblasting gun,
Therefore Type II machine can be used as an ideal water blasting machine for high pressure water blasting room;
Type II machine has relatively fixed requirements on the air compressor, and the flow rate of 35HP must be guaranteed to achieve ideal sandblasting effect and efficiency.
The advantage is that the water sand is sprayed out after mixing, which means that the sprayed wet sand can be re-filled and re-blasted immediately after being recycled, which is suitable for indoor recycling. The more expensive abrasives are used, and the heat is especially suitable as the host of the high-pressure water sandblasting room.